Mounting frames

Mounting frames

For an optimal fit of the filter elements

Viledon mounting frames are suitable for the installation of Viledon filters with a front frame, e.g. Compact pocket filters or MaxiPleat cassette filters. Panel filters featuring the standard depth of 48 mm can also be installed.

Applications Features
Article Article number Dimensions (W x H x D) [mm] Suitable for filters in the dimensions (mm, approx.)
ARV-LD NF 1 / 1 A-Rahmen verzinkt mit Dichtung 53373316 610 x 610 x 75 1 / 1 592 x 592
ARE-LD NF 1 / 1 A-Rahmen Edelstahl mit Dichtung 53373325 610 x 610 x 75 1 / 1 592 x 592
ARV-LD NF 5 / 6 A-Rahmen verzinkt mit Dichtung 53435027 508 x 610 x 75 5 / 6 490 x 592
ARE-LD NF 5 / 6 A-Rahmen Edelstahl mit Dichtung 53435039 508 x 610 x 75 5 / 6 490 x 592
ARV-LD NF 1 / 2 A-Rahmen verzinkt mit Dichtung 53377509 305 x 610 x 75 1 / 2 287 x 592
ARE-LD NF 1 / 2 A-Rahmen Edelstahl mit Dichtung 53377510 305 x 610 x 75 1 / 2 287 x 592
ARV-LD NF 1 / 4 A-Rahmen verzinkt mit Dichtung 53435028 305 x 305 x 75 1 / 4 287 x 287
ARE-LD NF 1 / 4 A-Rahmen Edelstahl mit Dichtung 53435040 305 x 305 x 75 1 / 4 287 x 287
High functional dependability
High functional dependability
Easy installation
Easy installation

Applications

Application: Construction and rebuilding of air handling systems with any desired dimensions.

Use: Secure holding of Viledon pocket filters and cassette filters (MaxiPleat, NanoPleat, CarboPleat, DuoPleat).

Construction: Stainless high-grade steel (Material 1.4301) or galvanised steel sheet (U-St 1203), burr-free, inherently rigid, in 4 sizes, positive clamp spring system with mechanical locking.

Features

  • High inherent rigidity thanks to special jointing process and large construction depth.
  • Centering guides assure optimum positioning of the filter elements.
  • Consistent leakproofing thanks to four friction-locked clamping springs, which are fixed in position in “locking noses”.
  • The shape of the springs enables the filters to be easily installed and removed, since the free cross-sectional area of the mounting frame is available in full.
  • The boreholes for the screws have been selected so as to ensure that mounting frames of different sizes can be combined without any problems.
  • An ultra-flexible, silicone-free rubber clip-on seal with a hollow compartment is supplied with the frame. The clip-on seal is weatherproof and thermally stable within a range of approx. −40 °C to +100 °C, with good resistance to alcohols, lyes and weak acids, and very long-lived.
  • Depending on the size of the filter wall, and the stresses acting on it, we
    recommend providing additional reinforcements as a substructure. M 6 × 8 screws should be used for affixing the frames; if reinforcements are provided, then correspondingly longer screws must be selected.